There are several types of tubs, however, one of the most used materials when building bath tubs or hot tubs nowadays is fiberglass. Being a versatile and economic material, many people prefer it when choosing the implements and artifacts for their houses. Fiberglass is relatively light compared to other materials such as porcelain or marble and its cleaning is simple if it is done with the right products and methods.
As mentioned above, fiberglass is an easy-to-clean material; but nevertheless; it can deteriorate or scratch if abrasive products or rustic implements are used. For that reason, it is important to know how we can keep our tub clean with having no risk to spoiling its appearance.
The first step when cleaning a fiberglass tub is to remove the dust and the remains of soap from the surface. For this, you can use low cost products that you probably have in your kitchen cupboard. If it is only loose powder, it is best to use a cloth or a soft bristle brush to remove it. In the case of mure or sticky spots; you must apply a solution that softens them and allows their easy removal.
One of the most used ingredients in these cases is vinegar, which can be placed in an atomizer and sprayed on the surface to be treated. If there are very deep spots, let it act for a few minutes so that the action of the vinegar penetrates deeply the dirt and permits to eliminate it easily. You can also use a sponge and baking soda, for this, bicarbonate is spread on the fiberglass after having applied vinegar, this will cause an effervescent effect that will help us remove the stuck dirty. Then it has to be scrubbed with a sponge and rinsed.
In case the spots are very deep or have been there for a long time; you can make a mixture of sodium bicarbonate with water, this will form a paste that should be applied on the affected area and should be left to act for at least 12 hours. Then it has to be removed and rinsed with soapy water. In the same way, lemon can be added to activate the bicarbonate and generate foam.
Another product quite used to remove stains on fiberglass is acetone or solvent, both are quite delicate substances and can be dangerous; so their application must be carried out with extreme care. In the same way, its use is recommended only on very complicated spots since as being abrasive chemicals, they can damage the fiberglass. It is also necessary to pay attention to whether the tub is covered with enamel or not as this could determine the use of these elements. In this case, the use of gloves and eye protection is mandatory.
In any circumstance, the employment of brushes to scrub the adhering dirt should be avoided since these objects can scratch the surface and spoil the appearance of the tub. Also, wax or silicone can be used for polishing techniques to keep the tub shiny and tidy. Remember that the aspect of it will be equally affected by the state of its water; therefore, it should be kept clean, filtered with ozonators and purified with the appropriate chemicals and sanitizers.